ENDOTHERMIC KIT

ALL THE POWER OF HEAT

pannello
PIANTAGRASSA OK low 1

  iconeco

  100% LOVE FOR THE ENVIRONMENT

Energy saving, drastic reduction in working time and zero emissions into the atmosphere: these are the advantages of installing a Saima Endothermic Kit on your paint booth. This technology promotes, through the principle of irradiation, the immediate heating of the surfaces to be painted, with a completely green choice capable of reducing the costs of activity while respecting people’s health and the environment. Traditional diesel or gas burners are replaced by endothermic panels with high emission capacity which, strong of a radiant core and powered only by electricity, making it possible to quickly reach high temperatures and transfer the heat directly on the surface to be painted without having to heat the air. This solution avoids costly heat loss, unnecessary energy transfers and does not provide for any combustion, ensuring the achievement of a threefold advantage: the reduction of drying times, considerable energy savings and the absence of emissions into the atmosphere caused by traditional burners. At the same time, the heat transferred directly to the surface reduces the duration of the painting and drying cycles, thus increasing their effectiveness, with a consequent and important reduction in production costs. 

lineacolore

SAIMA ENDOTHERMIC KIT 10

Kit of endothermic panels with maximum working temperature equal to 180° C. 

· Kit 10 Model

kit1

• control panel 

• 10 endothermic panels with sizes 2.385x730x39 mm placed as in the picture 

for 30 kW totally. This model is available also for units with lower lights at a distance of at least 800 mm from the floor. It is suitable for painting areas up to 8×4 m. 

· Kit 10 B Model

kit2

• control panel 

• 2 endothermic panels with sizes 2.385x730x39 mm 

• 4 endothermic panels with sizes 2.385x520x39 mm 

• 4 endothermic panels with sizes 2.385x950x39 mm 

for kW 30 totally. This model is available for units with two rows of lights at a distance of at least 1.000 mm from each other. It is suitable for painting areas up to 8×4 m. 

· Model Kit 10+4

ki3

• 10 endothermic panels with sizes 2.385x730x39 mm 

• 4 endothermic panels with sizes 2.385x290x39 mm 

for 34 kW totally. This model is available also for units with lower lights placed at a distance of at least 800 mm from the floor. It is suitable for painting areas up to 8×4 m.